• It is elastic and bridges static cracks in the substrate.
• Blocks moisture in the substrate up to a value of 4%
• High adhesion strength to the substrate
• It is resistant to mechanical loads.

Packaging:

20 kg set

Additional options:

It is also used as a binder for epoxy mortars with quartz sand:

• Epoxy mortar up to 1 mm thick
  • 1.45 kg /m2 of mortar for a layer thickness of 1 mm
  • Mortar composition: 0.97 kg of EP 101E (A+B) mixture + 0.48 kg FE quartz – quartz sand
• Epoxy mortar up to 2 mm thick
  • 1.63 kg/m2 of mortar for a layer thickness of 1 mm
  • Mortar composition: 0.82 kg of EP 1013 mixture (A+B) + 0.81 kg of FE quartz – quartz sand
• Leveling compound 15–20 mm thick
  • 2.2 kg/ m2 of mass for a layer thickness of 1 mm
  • Composition: Floor expert EP 101: Floor expert quartz mix = 1:10

System:

Used in systems with EP and PU topcoats.

Instructions for use:

• Apply as a primer with a short-haired roller, brush or rubber trowel.
• The coating must completely cover the substrate.
• If necessary, apply two coats.
• Mortar for leveling rough surfaces is applied with a rubber trowel or notched trowel, depending on the thickness.

• Penetrates deeply into the substrate
• Blocks moisture in the substrate up to a value of 4%
• High adhesion strength to the substrate

Packaging:

20 kg set

Additional options:

It is also used as a binder for epoxy mortars with quartz sand:

• Epoxy mortar up to 1 mm thick
  • 1.59 kg /m2 of mortar for a layer thickness of 1 mm
  • Mortar composition: 1.06 kg of EP 1013 mixture (A+B) + 0.53 kg of FE quartz – quartz sand:
• Epoxy mortar up to 2 mm thick
  • 1.8 kg/m2 of mortar for a layer thickness of 1 mm
  • Mortar composition: 0.9 kg of EP 1013 mixture (A+B) + 0.9 kg of FE quartz – quartz sand
• Leveling compound 15–20 mm thick
  • 2.4 kg/m2 of mass for a layer thickness of 1 mm
  • Mortar composition: Floor expert EP 101: Floor expert quartz mix = 1:10

System:

Used in systems with EP and PU topcoats.

Instructions for use:

• Apply as a primer with a short-haired roller, brush or rubber trowel.
• The coating must completely cover the substrate.
• If necessary, apply two coats.
• Mortar for leveling rough surfaces is applied with a rubber trowel or notched trowel, depending on the thickness.

• Penetrates deeply into the substrate
• Blocks moisture in the substrate up to a value of 4%
• High adhesion strength to the substrate

Packaging:

10 kg and 25 kg sets

Additional options:

It is also used as a binder for epoxy mortars with quartz sand:

• Epoxy mortar up to 1 mm thick
  • 1.35 kg/m2 of mortar for a layer thickness of 1 mm
  • Mortar composition: 0.9 kg of EP 101 mixture (A+B) + 0.45 kg FE quartz – quartz sand
• Epoxy mortar up to 2 mm thick
  • 1.6 kg/m2 of mortar for a layer thickness of 1 mm
  • Mortar composition: 0.8 kg of EP 101 mixture (A+B) + 0.8 kg of FE quartz – quartz sand
• Leveling compound 15–20 mm thick
  • 2.4 kg/m2 of mass for a layer thickness of 1 mm
  • Mortar composition: Floor expert EP 101: Floor expert quartz mix = 1:10

System:

Used in systems with EP and PU topcoats.

Instructions for use:

• Apply as a primer with a short-haired roller, brush or rubber trowel.
• The coating must completely cover the substrate. If necessary, apply two coats.
• Mortar for leveling rough surfaces is applied with a rubber trowel or notched trowel, depending on the thickness.

Video:

Epoxy floor system for the protection and decoration of ceramic tiles – Floor Expert MD E2L – YouTube