• Evens out the absorbency and structure of the substrate
• Prevents rapid loss of water from freshly applied plaster
• Makes it easier to apply and smooth the finishing plaster
• Tinted to match the tone of the finishing plaster, it ensures an even shade of the finishing layer

Packaging:

8kg, 25kg

Shades:

Shades from the CHROMOMIX and EXTERIOR COLOUR COLLECTION color charts can be obtained by tinting at points of sale (CHROMOMIX SYSTEM).

Instructions for use:

• The surface must be clean, dust-free, dry, non-frozen, absorbent, solid
• Mix well with a mixer in the original packaging.
• and dilute with about 10% by weight of water.
• Must not be mixed with other materials
• Apply using a roller or painter’s brush.

• Good adhesion
• Improves substrate adhesion
• Ready to use

Packaging:

5kg, 20kg

Instructions for use:

• For use on exterior and interior walls
• Apply once with a roller
• Or a paintbrush
• Do not dilute with water.
• 1 kg in one layer covers approx. 4m²

• Reduces and evens out the absorbency of the substrate
• Improves adhesion and facilitates structuring of finishing plasters
• Provides an even shade of the finish coat

Packaging:

8kg, 25kg

Shades:

Shades from Chromomix and EXTERIOR COLOUR COLLECTION (CHROMOMIX SYSTEM) colour chart, according to the shade of the finishing plaster

System:

Fasadex primer / Fasadex plasters

Instructions for use:

• For use on exterior and interior walls
• Apply once with a fur roller
• Or a paintbrush
• Dilute with 10% water.
• 1 kg in one layer covers 5 m²

• Prevents salt efflorescence, lime leaching and prevents walls from getting too wet
• Prevents the growth of microorganisms (fungi and mold), premature erosion and soiling of the facade
• Improves the thermal insulation capacity of walls
• Does not reduce the ability of the substrate to “breathe”
• Does not change the color of the substrate

Packaging:

1 liter, 4 liters, 20 liters

Instructions for use:

• For use on outdoor surfaces
• Apply two to three times with a brush “wet on wet”
• Alternative: air gun
• Do not dilute with thinner.
• Coverage – 1 l in one layer covers 0.5–4.0 m², depending on the absorbency and roughness of the substrate

• Penetrates deeply into the substrate and strengthens it
• Evens out and reduces the absorbency of the substrate
• Improves adhesion of new coatings
• Reduces consumption of topcoats

Packaging:

5 liters 15 liters

System:

Fasadex silicate impregnation / Fasadex silicate paint

Instructions for use:

• For use on exterior walls
• Apply once with a brush or
• Apply once with a fur roller
• Diluted with water in a ratio of 1:1
• Coverage – 1 l in one layer covers approximately 15 m² (calculated as pure impregnation, without added water)

• Penetrates deeply into the substrate and binds loose particles
• Does not reduce water vapor diffusion
• It is resistant to alkalis and atmospheric agents.
• It is water-repellent.

Packaging:

5 liters

System:

Fasadex silicone impregnation w / Fasadex MS filler (if necessary) / Fasadex silicone paint

Instructions for use:

• For use on exterior walls
• Apply once with a brush or once with a fur roller
• Diluted with water in a ratio of 1:1
• 1 liter of undiluted impregnation covers 16 m²

• Penetrates deeply into the substrate
• Connects surface particles
• Does not reduce the vapor permeability of the substrate
• It is resistant to external influences
• Reduces and evens out the absorbency of the substrate

Packaging:

4 liters, 20 liters

System:

In systems with all types facade paints

Instructions for use:

• For use on exterior walls
• Apply once with a brush
• Do not dilute with thinner.
• Coverage – 1 l in one layer covers 4 m²

4 liters

System:

1. Hidronivelit 2K
2. Mortars for bonding and processing thermal insulation boards
3. Nivelit Z 101 or Nivelit Extra 205
4. Compounds for leveling and smoothing floor surfaces
5. Ceramic adhesives

Instructions for use:

• For use on exterior and interior surfaces
• Apply once with a brush
• Or apply once with a roller
• Or a paintbrush
• Add water in a ratio of 4:1 – water:Chromofas impregnation
• Coverage – 1l (concentrate) in one layer covers 25-33 ^m2

• Penetrates deeply into the substrate
• Connects and fixes surface particles
• Evens out the absorbency of the substrate

Packaging:

Set (base + contact): 4 + 2 kg

System:

Hydroepoxy impregnation / Hydroepoxy varnish paint

Instructions for use:

• For use on interior surfaces
• Apply once with a brush or once with a fur roller
• Add contact
• 1 kg of mixture (base + contact) covers 10 m²; 1 set (4+2 kg) covers 60 m²

• Penetrates deeply into the substrate
• Evens out absorbency
• Connects surface particles
• It improves adhesion and ensures a firm connection of new coatings

Packaging:

1 liter, 5 liters

System:

In systems with all types of facade and interior coatings based on synthetic resins

Instructions for use:

• For use on exterior and interior walls
• Apply once with a brush or once with a fur roller
• or a paintbrush
• Add water
• Coverage – 1 l (concentrate) in one coat covers 25–33 m²