Consumption calculator:
m2
1 - 2
* Consumption is calculated for one coat
Technical Data Sheet
Safety Data Sheet
Floor Expert EP 101E
Two-component elastic primer based on flexibilized epoxy resin, solvent-free.
It is used as a primer on concrete, asphalt, and similar flexible substrates, as well as a binder for mortars with quartz sand.
Characteristics:
- It is elastic and bridges static cracks in the substrate.
- Blocks moisture in the substrate up to a value of 4%
- High adhesion strength to the substrate
- It is resistant to mechanical loads.
Packaging:
20 kg set
Additional options:
It is also used as a binder for epoxy mortars with quartz sand:
- Epoxy mortar up to 1 mm thick
- 1.45 kg /m2 of mortar for a layer thickness of 1 mm
- Mortar composition: 0.97 kg of EP 101E (A+B) mixture + 0.48 kg FE quartz – quartz sand
- Epoxy mortar up to 2 mm thick
- 1.63 kg/m2 of mortar for a layer thickness of 1 mm
- Mortar composition: 0.82 kg of EP 1013 mixture (A+B) + 0.81 kg of FE quartz – quartz sand
- Leveling compound 15–20 mm thick
- 2.2 kg/ m2 of mass for a layer thickness of 1 mm
- Composition: Floor expert EP 101: Floor expert quartz mix = 1:10
System:
Used in systems with EP and PU topcoats.
Instructions for use:
- Apply as a primer with a short-haired roller, brush or rubber trowel.
- The coating must completely cover the substrate.
- If necessary, apply two coats.
- Mortar for leveling rough surfaces is applied with a rubber trowel or notched trowel, depending on the thickness.