Fasadex Nano plaster

Thin-layer protective-decorative paste plaster based on acrylate binder, potassium water glass and nano particles of silicon dioxide. Thanks to the mineral character of the surface and the smooth surface, this plaster is resistant to dirt, vapor permeable and resistant to the growth of microorganisms. It is produced in a granular – Z and grooved – R structure.

Purpose:
Protection and decoration of buildings exposed to increased concentrations of inorganic and organic pollutants in the air (fine dust, combustion products, etc.). As a ready-made structural finishing plaster, it is used for the protection and decoration of external wall surfaces on old and new mineral plasters, leveling compounds, concrete surfaces and as a final layer in the Fasedx MW thermal insulation system.

Characteristics:

• low tendency to soiling
• is resistant to atmospheric conditions
• vapor permeable
• is resistant to abrasion and impact
• is resistant to the growth of microorganisms
• easy to apply

Packaging:

plastic packaging 25kg

Consumption:
1.5 mm Z: approx. 2.5 kg/m2
2.0 mm Z: approx. 3.0 kg/m2
2.0 mm R: approx. 3.0 kg/m2
2.5 mm R: approx. 3.2 kg/m2

System:

FASADEX MW CONNECTED SYSTEM FOR EXTERNAL THERMAL INSULATION
1. FASADEX CHROMOTERM – adhesive for MW lamellas/boards
2. FASADEX MW panels/lamellas (thermal insulation)
3. CORNER PROFILE
4. ATTACHMENT
5. FASADEX CHROMOTERM – base coat
6. FASADEX glass mesh
7. FASADEX GRUND – primer
8. FINAL LAYER:
• FASADEX NANO PLASTER

Instructions for use:

• The surface must be flat, clean, dry, frost-free and solid.
• Before use, mix FASADEX Si-Si plaster well with a mixer in the original packaging.
• Apply by hand evenly with a stainless steel trowel in the thickness of the coarsest grain.
• or spray mechanically with a suitable machine
• Plaster must not be applied to a surface exposed to direct sunlight (protect the facade with a screen) or in windy, foggy or rainy weather.