-
Ready-made compound based on water dispersion of synthetic binder and silicate fillers for leveling and smoothing external and internal walls made of plaster, concrete, plywood, chipboard, etc. -
Fasadex quartz primer is a basic rough coating based on synthetic binder, mineral fillers and additives for preparing smooth concrete and finished concrete surfaces before applying cement, lime-cement and gypsum-lime plasters. -
Bonding layer between moist and salt-burden mineral substrates and FASADEX RENO 320 renovation plaster. -
Ready-made factory-made mortar based on mineral binders, aggregates of various granulations and special additives with a high content of special pores for salt deposition. -
Fine finishing plaster based on mineral binders, aggregates of various granulations and special additives for final leveling of repair plaster. -
Ready-made factory-made mortar based on mineral binders, aggregates of various granulations and special additives for renovation and leveling of interior and exterior walls and ceilings. Application thickness in one layer from 1 to 10 mm. -
Ready-made factory-made mortar based on mineral binders, aggregates of various granulations and special additives. Mineral plaster for renovation and leveling of interior and exterior surfaces, walls and ceilings made of brick and concrete, new buildings, old surfaces, load-bearing old plasters, and monumental heritage in thicknesses from 3 to 30mm. -
Colorless water-repellent impregnation based on a silicone resin solution in an organic solvent for hydrophobicizing all types of porous mineral materials. It is used when it is necessary to protect highly absorbent surfaces (natural and artificial stone, brick, mineral plasters, concrete, etc.) from water penetration, while maintaining their texture and natural appearance. It does not reduce the vapor permeability of the material. -
Thin-layer protective-decorative paste render based on acrylic binder, potassium water glass, and special hydrophobically modified mineral fillers. It is characterized by high water repellency and excellent resistance to weather conditions. It is produced in granular – Z and grooved – R structure. As a ready-made structural finishing render, it is used for protection and decoration of exterior wall surfaces on old and new mineral renders, leveling compounds, concrete surfaces, and as a finishing layer in the Fasadex MW thermal insulation system. -
Primer based on potassium water glass and aqueous dispersion of acrylate copolymer for impregnating lime and lime-cement surfaces before applying Fasadex silicate paint. It is diluted with clean water in a ratio of 1:1. -
Paint based on potassium water glass and aqueous dispersion of acrylate copolymer for the protection and decoration of facades made of old and new mineral plasters and the renovation of old silicate paint and plaster surfaces. Due to its high vapor permeability and matte surface, it is suitable for painting listed buildings. -
Thin-layer pasty protective-decorative plaster based on potassium water glass and acrylate copolymer dispersion, granular - Z and grooved - R structure, for treating external and internal wall surfaces. It is used as a ready-made structural finishing plaster for facades on base plasters, leveling compounds and as a final layer in the Fasadex MW connected external thermal insulation system. -
Water-based silicone water-repellent impregnation for impregnating lime and lime-cement plasters before applying Fasadex silicone paint. -
Paint based on silicone resin emulsion and water dispersion of acrylate copolymer for the protection and decoration of facades made of mineral plasters and the renovation of old surfaces of silicate and silicone paints and plasters. Due to its high vapor permeability and matte surface, it is suitable for painting listed buildings. -
Thin-layer pasty protective-decorative plaster based on dispersion of acrylate copolymer and silicone resin. It is produced in a granular - Z and grooved R structure. It is used as a ready-made structural finishing plaster for the protection and decoration of external and internal wall surfaces on old and new mineral plasters, leveling compounds and as a final layer in the connected external thermal insulation systems Fasadex EPS and Fasadex MW. -
Deep primer based on water dispersion of acrylate copolymer for increasing the adhesion of new coatings on old substrates, for impregnation and regulation of absorption of mineral and other substrates and for preparing the substrate before applying plasters and dispersion paints. It is diluted with clean water in a ratio of 1:5. -
Paint based on a solution of acrylic resin in an organic solvent for the protection and decoration of facades in all climate zones and the protection of civil engineering structures (bridges, etc.). -
Deep primer based on an acrylic resin solution in an organic solvent for impregnating exterior and interior mineral surfaces before smoothing with putties or painting, for impregnating plasterboard panels and concrete with formwork oil residues. -
Dispersion facade paint with the addition of fibers for the sanation of crude and fine plasters where hairy cracks have appeared, as well as the equalization (evening) and renewal of all types of thin-layer finishing plasters. -
Solvent mixture for cleaning and diluting Floor Expert products based on reactive resins. Used for cleaning uncured coating residues from application tools and machines and for diluting Floor Expert products to adjust the viscosity for application. -
2K transparent epoxy resin, solvent-free. It is used as a transparent layer for the final decorative treatment in concrete floor systems, when we want to achieve various decorative effects and surface strengthen the system. -
Colored flakes (chips) of irregular shape, with defined particle distribution. They are used for the production of decorative floor coatings based on epoxy, polyurethane and acrylic resins. By sprinkling them on a freshly applied layer of coating, an interesting multi-colored effect is achieved. -
Two-component, solvent-free epoxy resin-based primer. Used as a primer on concrete floors and cement screeds of moderate to high absorbency and as a binder for epoxy mortars with quartz sand. -
Two-component economical primer based on epoxy resin, solvent-free. It is used as a primer on concrete floors and cement screeds with moderate to high absorbency, and as a binder for epoxy mortars with quartz sand. -
Two-component elastic primer based on flexibilized epoxy resin, solvent-free. It is used as a primer on concrete, asphalt, and similar flexible substrates, as well as a binder for mortars with quartz sand. -
Two-component colored self-leveling floor compound based on epoxy resin. It is intended for the protection and decoration of concrete floor surfaces and cement glazes exposed to medium to heavy mechanical and chemical wear (warehouses, workshops, production areas, garages, laboratories, loading ramps, etc.). It is possible to achieve an anti-slip floor surface in garages and production facilities with the so-called. "wet" processes. It is used exclusively in indoor spaces. -
Two-component, solvent-free, self-leveling floor screed based on epoxy resin. It is intended for strengthening and leveling concrete surfaces and cement screeds exposed to medium to heavy mechanical and chemical wear (warehouses, workshops, production areas, garages, laboratories, loading ramps, etc.), and is also used as a base layer in systems with quartz grit to achieve an anti-slip surface in garages and production facilities with so-called "wet processes". -
Two-component water-dilutable covering coating based on epoxy resin. It is intended for the protection and decoration of concrete floor surfaces exposed to moderate to medium mechanical and chemical wear (warehouses, production areas, garages, laboratories, etc.). It can be used for the protection and decoration of walls and floors covered with ceramic tiles. It is used exclusively in indoor spaces. -
Two-component topcoat based on epoxy resin, solvent-free. It is intended for the protection and decoration of concrete floor surfaces exposed to moderate to medium mechanical and chemical wear (warehouses, workshops, production areas, garages, laboratories, exhibition and sales areas, etc.). It is also used as a final sealing coating in anti-slip systems for heavier mechanical loads: garages, production facilities with so-called "wet" processes. It is used exclusively in indoor spaces. -
Two-component, colored, self-leveling floor compound based on polyurethane resin, solvent-free. Intended for the protection and decoration of concrete floor surfaces and cement screeds exposed to medium to heavy mechanical and chemical wear (hospitals, schools, sales and exhibition spaces, office corridors, industrial floors). It is used exclusively in indoor spaces. -
Two-component transparent matt topcoat based on water dispersion of polyurethane resin. Used as a transparent topcoat in FLOOR EXPERT EP and PU flooring systems, to achieve a matt surface and additional protection against damage caused by mechanical and chemical influences.
